This is a carousel with one large image and a track of thumbnails below. Select any of the image buttons to change the main image above. The main image is also a button that opens a larger image inside of a modal with a carousel.
Regina Mid-Back Black Mesh Drafting Chair with Back Height Adjustment and Adjustable Arms
Mid-Back Black Mesh Drafting Chair with Back Height Adjustment and Adjustable Arms is rated
out of
5 by
60.
In Stock.
Usually ships in 24 hours
Original price: $1,034.00
Current price: $324.84
About Product
Draft chairs are essential for any profession where work surfaces are above standard height, such as lab technicians, architects, graphic artists, or any other creative assignment. The contoured backrest provides firm back support allowing your back to rest comfortably. The locking back angle adjustment lever changes the angle of your torso to reduce disc pressure. The waterfall front seat edge removes pressure from the lower legs and improves circulation. Chair easily swivels 360 degrees to get the maximum use of your workspace without strain. The pneumatic adjustment lever will allow you to easily adjust the seat to your desired height. The chrome foot ring can also be adjusted to your height preference. The adjustable armrests take the pressure off the shoulders and the neck, which minimizes the risk of pain. This versatile chair is sure to make an impact whether it is used in the home or work field.
Product Features
- Contemporary Draft Stool
- Mid-Back Design
- Curved Ventilated Black Mesh Back
- Built-In Lumbar Support
- Back Height Adjustment Knob positions the lumbar support to reduce back pain
- Infinite-Locking Back Angle Adjustment helps reduce disc pressure by changing the angle of your torso
- Padded Black Fabric Upholstered Seat
- CA117 Fire Retardant Foam
- Waterfall Seat reduces pressure on your legs
- Swivel Seat
- Pneumatic Seat Height Adjustment
- Height Adjustable Nylon Arms
- Height Adjustable Chrome Foot Ring
- Foot Ring Size: 18.25" Diameter
- Heavy Duty Nylon Base
- Dual Wheel Casters
- Made In Taiwan
- TAA Compliant
Product Specs
Product Reviews
Rated 3 out of
5
by
Anonymous from
3 Stars
I bought this because the drafting chair I had at my art desk didn't angle back (recline). I was tired of sitting with my body thrust over the desk. (Probably looked kinda funny, too!) That chair was wonderfully comfortable, except for the strange posture it forced you to maintain. This one seemed to be just like that one...until it arrived. It's a very cheap version of that chair. The arms are very cheap and not substantial at all, but that's kind of how the whole chair is. My previous chair was much heavier than this one - and the back locked into place. The back on this one pulls up every time I grab the chair to move it. That kind of gets annoying. This isn't a "bad" chair, but I wouldn't buy it again. There are MUCH better options out there for the money. (However, I do love that this one reclines a little!)
Date published: 2017-02-15
Rated 4 out of
5
by
Anonymous from
Issues With Foot Rest
Okay, for the price...I'd say it's pretty good quality. I did buy it however for the height adjustability since I raised my computer monitor with new desk. I agree with the other reviewer about the foot rest. It's virtually impossible (unless you have very long legs) to sit back and enjoy the ergonomic comfort and still be able to 'tuck' your feet back under the chair for the foot bar. I am giving
Date published: 2013-08-05
Rated 3 out of
5
by
Anonymous from
Comfortable For The Price But
Easy to assemble and overall a good chair for the budget conscience consumer. However, I was looking for something that had a high seat hight and even though it says it's 29" tall, they measure that from the top of the cushion on the seat without anyone sitting on it, not the bottom of the seat frame. So knowing you will sink down a couple of inches, the reality is the seat height is only 26-27" a
Date published: 2013-08-05
Rated 4 out of
5
by
Anonymous from
Worth The Money
Nice chair, better quality than I expected. I use it at my home office which has a standing workstation - but need a chair for an occasional break from standing. The arm rests have wide range of adjustability, heavy duty mechanisms under seat to adjust height, seat is comfortable, very easy to assemble. Only complaint: the "adjustable" back doesn't go as high as I'd like, and if you lift too high
Date published: 2013-08-05
Rated 5 out of
5
by
Anonymous from
Everyone At The Office Is Jealous!
I purchased 2 of these for the lab techs at my clinic who sit in these for the better part of 8 hrs. My boss told me to spend $300 for a quality chair, but I took a risk and I'm so glad I did. These really look great, are easy to put together with a power drill (5 mins), are comfortable, solid, and go up high enough for lab counters. I always take a load off in one of them when I walk through the
Date published: 2013-08-05
Rated 5 out of
5
by
Anonymous from
Love It!
I love this chair! It's comfortable, sturdy, and adjustable. It does everything it claims and it looks great in my office as well. Other customer reviews mentioned some problems with assembly, arm rests and stability of the foot rest. I have none of those issues. I've been using this chair for a couple months now and am still in love with it. I wish I purchased it years ago. Such a great value!
Date published: 2013-08-05
Rated 3 out of
5
by
Anonymous from
Good Chair So Far Except For One Thing
The chair is comfortable, and, although I'm not crazy about the design, it's reasonably attractive. I'm displeased with the footring, though. It's good for nothing other than looking like it's useful even though it isn't. It's too wobbly to serve its intended purpose of providing a footrest. It attaches to the central support pillar with a hand-tightened set screw to secure it, which doesn't s
Date published: 2013-08-05
Rated 5 out of
5
by
Anonymous from
High Chair For Drafting Table
Good comfy chair. I am used to reading assembling instruction from which is easy to understand, this one is a little bit harder to see all the parts in illustration. In the end it was ok to assemble. The chair is heavy and strong. You can assemble it in different ways, with/without arm rest, and even lower position w/o foot rest. I assembled it with all the parts for my drafting table and th
Date published: 2013-08-05
Q & A
Have a question about this product? Ask here!